C1D2 900 MHz Modem

Waterproof C1D2 Certified 900 MHz Modem

This robust and reliable product allows you to build non-line-of-sight, point-topoint and point-to-multipoint wireless Ethernet connections that connect “fringe” IP devices, including IP access control readers, remote printers, remote PCs, VoIP phones, point-of-sale devices, digital signage or industrial control devices.

Features:

  • RF transmission rate 1.536 Mbps
  • Ethernet data rate 935 Kbps
  • Output power +21 dBm (4 Watts EIRP when used with 15 dBi antenna)
  • Range 40 miles line-of-sight with 15 dBi antenna
  • Connector types RF: RPTNC Female / 10/100 base T Ethernet RJ-45
  • Power consumption Transmit: 1.7 Watts Receive: 0.8 Watts
  • Voltage 9 to 48 VDC via unused pins in RJ-45 jack – pins 4,5 positive, 7,8 ground
  • Temperature range -40º C to +70º C
  • Physical Package Heavy die-cast Aluminum, black powder-coated finish, meets IP66 Standard for water and dust protection. Sealing gland for Ethernet cable entry.
  • Size 200 x 80 x 58 mm not including connectors; 0.570 Kg

Specifications

TECHNICAL

RF transmission rate 1.536 Mbps
Ethernet data rate 935 Kbps
Output power +21 dBm (4 Watts EIRP when used with 15 dBi antenna)
Receiver Sensitivity -97 dBm at 10-4 BER
Range 40 miles line-of-sight with 15 dBi antenna
RF channels/bandwidth 12 non-overlapping channels with 2.0833 MHz spacing and 1.75 MHz bandwidth
Frequency selection Automatic or manually selectable via web browser interface.
Connector types RF RPTNC Female / 10/100 base T Ethernet RJ-45
Data Encryption 128-bit AES, FIPS197, keys set through password-protected browser interface
Error correction technique Sub-block error detection and retransmission
Adjacent band rejection SAW receiver filter attenuates cellular and pager interference
Power regulation Built-in switching regulator
Browser management tools QoS Statistics, Network Settings, Spectrum Analyzer, Firmware Upgrade
Power consumption Transmit: 1.7 Watts Receive: 0.8 Watts
Voltage 9 to 48 VDC via unused pins in RJ-45 jack - pins 4,5 positive, 7,8 ground
Transmit current draw 175 mA at 9 VDC / 140 mA at 12 VDC / 35 mA at 48 VDC
Temperature range -40º C to +70º C
Physical Package Heavy die-cast Aluminum, black powder-coated finish, meets IP66 Standard for water and dust
protection. Sealing gland for Ethernet cable entry.
Size 200 x 80 x 58 mm not including connectors; 0.570 Kg
Compatibility May be mixed in combination with AW900iTR and AW900xTP radios, not compatible with older
AW900x, AW900xT, AW900i and AW900iT.

FULLY CUSTOMIZABLE

3 YEARS WARRANTY

CONTACT

Our address

Unit 200 – 17825 64 Ave
Surrey, British Columbia
Canada – V3S 1Z3

phone number

Phone: +1 604 502 9666
TF: +1 866 502 9666
Mon-Fri 08h AM - 4h30 PM

Send your message

Customize Now

To access all customization options, please fill the form below: